Cantilever racking

Cantilever racking is used in warehouses where long goods of various lengths are stored, such as: metal bars, logs, long plates, rack profiles, panels. With the addition of beams and gratings, custom pallets and packages can also be stored on long racks. The great advantage of the cantilever rack is the very high comfort of handling the goods due to its open structure. Due to the use of a structure that concentrates the entire load in the centre of the rack, it is possible to carry high loads. This allows the maximum use of the full length of the warehouse for storage. The only disadvantage of the cantilever rack is its limited height (in the case of a free-standing rack), due to the lack of front stabilization. High storage racks fulfil this role much better, as they are designed for high storage height.

A series of cantilever racks with several levels of storage

A series of cantilever racks with several levels of storage

Cantilever racking – simplicity of construction

Cantilever racking consist of a thick profile and product support brackets. It is a very simple structure that does not require any crossbeams, however the height is limited in order to maintain stability. In the case of double-sided storage on a long rack, it is important that the weight of the stored products is evenly distributed.

Cantilever racks are made of the following elements:

  • Base leg (base) – is the base of the rack and dictates the maximum size of the brackets, the length of which cannot exceed the length of the leg. Otherwise, there would be a chance to outweigh the structure and overturn it.
  • Profile (pole) – the backbone of the cantilever rack, is made of high quality-steel that can withstand high loads without the risk of cracking or bending.
  • Cantilever – the most important element of the rack on which all products are stored. They are made of thick, reinforced steel that can withstand a load of up to 1,900 kg.
  • Bracing – they give the structure stiffness between the profiles. They play a stiffening role, which would be played by crossbeams in a pallet rack. The bracing of the cantilever racks is made of thicker steel than other storage racks.
  • Cantilever stop (optional) – determines to which point the products can be loaded and protects them against accidental sliding.
  • Stiffening hook – keeps the braces in place, preventing them from loosening and falling out.
  • Cantilever bolts – Keep the brackets in place. Only one screw at the top is required as the weight of the bracket and the goods pushes the lower part against the profile.
Construction of Cantilever rack

Construction of Cantilever rack

Cantilever racks for logs

Cantilever racks for logs

Longitudinal shelves in a construction depot

Longitudinal shelves in a construction depot

Technical parameters

The standard offer includes cantilever racks up to a height of 6.5 m. On request, we also manufacture long racks with a height of up to 12 m. Such large maximum heights are possible to achieve by welding two identical elements of a cold-rolled frame together, which greatly increases the resistance to loads and damage. The maximum load on the frames is 14,800 kg. All our frames have a perforation every 100 mm, which gives a lot of freedom in mounting brackets. Massive supports made of 3 mm or 4 mm thick steel can withstand a load of up to 1,900 kg. The longitudinal rack supports must not exceed a length of 2,100 mm. In order to increase the safety of their use, they are mounted at an angle of 3 degrees towards the frame. All components of the cantilever rack have a default colour that can be changed when ordering. Default colour: for frames and bracing – RAL 5005, for cantilevers – RAL 2008).

Below you will find two tables with dimensions and loads for frames and supports.

Perforation of the cantilever rack profile

Perforation of the cantilever rack profile

Brackets loads

Schematics of cantilever rack bracket

Cantilever racking – bracket dimensions

(L – length, S – sheet thickness, h – height of the bracket at the profile)

LShMax. load
mmmmmmkg
600360600
901050
1201600
800390800
1201250
1501900
1000390650
1201000
1501400
15004120730
1501100
18004120600
150900
21004120500
150750

Frames of cantilever racking

Frame loads

The spacing and arrangement of the braces in standard cantilever racks

Maximum load per frame in kg.

Profil (mm)Baza (mm)Bracket length (mm)
60080010001200150018002100
250 x 3,0300 x 3,04500380032002800220018001600
300 x 3,0300 x 3,05400460039003400270022001900
350 x 3,0300 x 3,06000510045003900320026002200
400 x 3,0400 x 3,09000770063005300450037003100
450 x 3,0500 x 3,010000860077007000600050004200
500 x 3,0500 x 3,011100950085007700650055004500
400 x 4,0400 x 4,0120001020084007100600052004400
450 x 4,0500 x 4,01350011500102009400800066005600
500 x 4,0500 x 4,014800126001110010300870071006000

Purpose

Cantilever racks are best used in the following facilities:

  • Sawmills – storage of sawn timber, processed boards (both loose and in packages), beams intended for construction, roof trusses. It is recommended to place them in a building / warehouse so that the wood does not soak up moisture. Dampness leads to an increase in the weight of wooden products, and thus may result in overloading the rack.
  • Building depots and stores – storage of boards for sale, non-rotating and hard pipes, storage of metal frames, chipboard, metal and aluminium profiles.
  • Warehouses – storage of all kinds of long products intended for distribution.
  • Factories – temporary storage of materials intended for shipment, e.g. rotor blades for helicopters, windmills, metal sheets.
  • Back-up facilities of DIY stores – PVC pipes, boards, metal pipes, building materials, etc.
Cantilever racks loaded with logs on pallets

Cantilever racks loaded with logs on pallets

How to use long rack

The load must be on at least two brackets, it is allowed to exit the load along the entire length of the rack outside the bracket for a maximum of 50% of the distance between the profiles. All the weight on the supports should be evenly distributed along the support.

Cantilever racks - recommended use

Cantilever racks – recommended use

Cantilever racks – advantages

The biggest advantages of the cantilever rack are the possibility of loading and unloading materials “from the side”. This allows for the storage of goods of very different sizes and very easy access to them. This is possible thanks to the open design, where the profiles are only in the centre of the rack.

The main advantages of the cantilever rack:

  • The possibility of storing very long goods
  • High versatility – storage of non-standard pallets and goods of various dimensions and lengths
  • Very comfortable access to the goods (open structure without poles)
  • High load capacity and durability
  • Easy visual assessment of inventory
  • Reinforced profiles with increased load capacity, stiffening the structure, thus providing a high level of storage safety
  • One-sided or two-sided installation possible
  • Adjustable mounting level of the brackets
  • Ease of assembly and quick assembly due to the small number of elements required for assembly
  • The whole thing takes up less space in relation to the pallet racks
  • The inclination of the brackets can be adjusted
  • Uncomplicated, modular design
  • Various applications, e.g. cable reels, oversized pallets, pipes, rods, logs …
  • Outdoor use in hot-dip galvanized version
Cantilever racks - wall-mounted

Cantilever racks – wall-mounted

Outdoor cantilever racks

When using cantilever racking outdoors, remember the following:

  • The floor on which we will place the long racks must be solid, e.g. concrete floor or foundation benches under the feet.
  • Placing the racks on cubes or other unstable ground is prohibited as it may collapse the structure.
  • All cantilever racks are specially prepared by applying hot-dip zinc. This increases their resistance to external conditions, but is associated with additional costs and extending the delivery time.
  • Additional roofing of external shelves is associated with an increased risk of their instability during intense winds. For this reason, we do not recommend this solution for outdoor shelving. We can only recommend external suppliers of such a roof, but outside the scope of our delivery.
  • Products stored outdoors may become wet or snow may fall on them. This can lead to an overload of the long rack, if we do not leave the “buffer” of the load.
  • The floor on which the cantilever racks are installed should be monitored for cracks that could affect the fixing of these racks to the ground.
External cantilever racks - hot-dip galvanized

External cantilever racks – hot-dip galvanized

Accessories

Rubber bumpers

They are mounted on legs and brackets to protect the rack and staff from accidental collisions. Instead of potential dents in a metal bracket or a leg, we get a damaged bumper, which is much cheaper to replace.

Protective rubber bumpers for crossbeams for cantilever racks

Protective rubber bumpers for crossbeams for cantilever racks

Front foot bumpers

Bumpers to protect the legs against collisions with forklifts and other vehicles. This provides additional protection against tipping over or damaging key structural elements of the cantilever rack.

Front foot bumper

Front foot bumper

Lattice shelves

They are used as a filling that allows to transform the storage levels of the cantilever rack for logs to the level for loose products. This allows you to personalize the shelf by, for example, allocating two lower levels for logs and the remaining ones for loose materials.

Cantilever racks with levels for logs and general cargo on grid shelves

Cantilever racks with levels for logs and general cargo on grid shelves

Crossbeams

They are used to convert a cantilever rack into a pallet rack, giving you more storage options. For example, you can create a hybrid warehouse based on cantilever racks – the first three levels are dedicated to logs and the rest to pallets. In addition, the beams improve the overall stability of the storage rack frames and thus the overall structure.

Crossbeams for cantilever racks

Crossbeams for cantilever racks

Roller grips

They allow for hanging rolls, spools and all round goods on the cantilever rack, and at the same time enabling their possible unfolding. These types of grips are available in several variants, allowing for the installation of various lengths of rolls.

Roll holders for cantilever racks

Roll holders for cantilever racks

The highest standard

The use of the highest quality steel and high production standards have resulted in the fact that our cantilever racks have obtained the German TUV certificate, which proves the professional performance of our cantilever racks.

TUV certificate

Full service

Feel free to contact us for individual pricing and warehouse design with the use of cantilever racks. If you have any questions, please contact our sales department, who will answer your questions.

Transport

We organize the transport of cantilever racks to any place in Poland and the EU.

Financing

We provide attractive financing of longitudinal shelves in the form of leasing. You do not need your own funds to finance the investment.

Similar warehouse rack systems

Pallet racks

Warehouse racks for facilities where goods are stored mainly on standard pallets. A wide range of various profiles, crossbeams and accessories allows for personalized equipment of each warehouse.

Standard pallet racks

Standard pallet racks

High storage racks

Storage racks adapted to the storage of materials at high altitudes. They make the most of the available space in warehouses.

High storage racks for pallets

High storage racks for pallets

Mezzanine floors

Increase your warehouse space or create a completely new, additional space for workstations or for packaging goods. Quickly and without formalities, gain an additional utility level or even several such levels in your current warehouse. Choose according to your needs: a shelf mezzanine, a mezzanine based on pallet racks or a storage platform.

Storage mezzanines - shelves with side mesh

Storage mezzanines – shelves with side mesh

Frequently asked question

Yes, the brackets can be easily removed and moved higher or lower thanks to the perforation in the profile, which occurs in 100 mm intervals.

The longest standard brackets in our range are 2,100 mm long, but generally speaking, the brackets in the rack can be longer. It is important that the length of the brackets does not exceed the length of the base leg, as it may tip the shelf over.

Yes, they can, but only after equipping them with special crossbeams and gratings, enabling safe pallet storage.

The standard spacing between the profiles ranges from 500 mm to 3500 mm.

It depends on what we intend to store. If you only plan on storing pallets, a pallet rack is the better choice. However, if you plan to store most of the logs, it is better to choose a cantilever rack. Thanks to the addition of accessories, it is also possible to store pallets, as well as oversized products. The cantilever rack is also much more convenient to operate than the pallet rack.

A pallet rack is cheaper because less steel is used in its production.

Items stored on a cantilever rack can be as long as the row itself. So, in practice, their length is limited only by the storage space in which the storage takes place.

The cantilever racks can store really heavy materials, the weight of which can be up to 14,800 kg per profile. Thanks to the use of many profiles, we can obtain a much greater total lifting capacity, i.e. a multiple of 14.8 tons. For example, you can store helicopter rotors or heavy structural beams on them.

You can, but it is associated with their special preparation by hot-dip galvanizing, making them resistant to weather conditions. Additionally, they must be mounted on a concrete floor that guarantees the required stability.

You can, but it is associated with their special preparation by hot-dip galvanizing, making them resistant to weather conditions. Additionally, they must be mounted on a concrete floor that guarantees the required stability.

Commercial offers

tel. +48 536 801 077

+48 502 126 094

e-mail: sales@kifato.pl

Consent Management Platform by Real Cookie Banner